#Ps3 mac address trincoll ps3#

Your PS3 should be shown along with 'Configured OK'.

Start searching for matches then click Metrics and scroll down a little.

Navigate to the Warhawk arena using the directory on the left.

This guide will use Warhawk as an example.

Power on your PS3 and load a game with LAN support.

Congratulations! Your PlayStation 3 is now ready to play on XLink Kai!.The test will fail because the Internet and PSN are not accessible. (optional) Press X to test the connection, or press O to skip.Once the addresses are entered press right Your IP address will be different than the one shown below. Using the results from the IP Address Calculator enter the IP Address, Subnet Mask, Default Router, and Primary DNS.Select Wired Connection then press right.Press O to go back to Network Settings then scroll down to Internet Connection Settings and press X.Note: Your results will be different than what is shown below, this is just an example. Select Sony Playstation 3, enter the 4 digits, then click Calculate IP Address. With the last 4 digits of the MAC Address written down use the IP address calculator at.To determine what IP address to use on your PS3 look for the line that shows the MAC Address, specifically the last 7 digits. Connection to PSN will be unavailable when using the IP address XLink Kai requires. If you use PSN when not on XLink you will need to change back to these settings. Select Settings and Connection Status List and press X.Go all the way left to Settings then down to Network Settings Power on your PS3 and load the main XMB menu.To set the correct IP address on your PS3: Setting the IP manually ensures the smoothest experience possible. Automatic IP assignment is literally racing against your router to offer an IP address first and will often lose. If your PS3 is connected to your regular home network or is on your WiFi it is highly recommended you set a Static IP as detailed below. If your PS3 is connected directly to your computer with an Ethernet cable like the examples above automatic IP address assignment should work for you just fine as long as XLink Kai is started and logged in before the PS3 is powered on.

#Ps3 mac address trincoll serial number#

(Think of it like the serial number for the network interface) There are two ways to set the correct IP Automatic (DHCP) or Manual Static IP setting. We do this based on the last 4 digits of your console's unique MAC address. If you computer does not have an Ethernet port a USB Ethernet adapter can be used.Įvery console on XLink Kai needs to be using a unique IP address to avoid conflicts. The easiest way to have a semi-wireless setup is to connect your PC/Mac/Raspberry Pi to your PS3 with an Ethernet cable.

The computer running XLink Kai can not be fully wireless and there must be a wired connection to the computer for the network interface going towards the PS3 console. If its impossible to use a wired connection, WiFi can be used instead but the PC/Mac/Raspberry Pi must be connected to the console or your wireless router with an Ethernet cable. You will get the lowest latency (ping) and most stable connection possible.Ĭonnect your PS3 and computer to your router with Ethernet cables as shown below: The best way to play PlayStation 3 LAN on XLink is with a fully wired set up. To see if the game you want to play is supported please check the supported games page or look on the back of the game case.Ĭonnecting your PlayStation 3 Wired Connection

There are 77 games with the LAN feature for the PlayStation 3. Please be sure to read the Acceptable Use Policy.įollow the installation guide for your Operating System: You then need to verify your email address and consent to the XLink Kai data collection policy (GDPR compliance). Click on 'Sign Up' at the top of the XLink Kai home page and fill in your details, then click Submit.

#Ps3 mac address trincoll download#

To begin, you'll need to register for an XLink Kai account and download the program.